The PAM2863 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 4.5V and 40V and provides an externally adjustable output current of up to 2A. Depending upon supply voltage and external components, this can provide up to 30 watts of output power. The PAM2863 includes the output switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current. Output current can be adjusted below the set value, by applying an external control ** to the VSET pin. The VSET pin will accept either a DC voltage or a PWM waveform. The soft-start time can be increased using an external capacitor from the VSET pin to ground. Applying a voltage of 0.2V or lower to the VSET pin turns the output off and switches the device into a low current standby state. Simple low parts count Internal 40V NDMOS switch 2A output current Single pin on/off and brightness control Using DC voltage or PWM Soft-start High efficiency (up to 97%) Wide input voltage range: 4.5V to 40V Output shutdown Open LED Protection Short LED Protection Up to 1MHz switching frequency Typical 5% output current accuracy Pb-free SOP-8(EP) Packages 真诚与您合作,欢迎有需求朋友前来咨询详谈,PAM原厂授权代理 联系方式: 卢小姐 0755-83282062 地址:深圳市福田区福华路嘉汇新城汇商中心3003